for REAL measurements, not just simulation
For more Information check on Web: http://www.ceet.niu.edu/faculty/kostic and LabVIEW and DAQ
DATE: 1996, 1997 ... and beyond
| RE: Six computers in CEET Computer Lab (1st Floor, back-room) are set-up and equipped with | |
| LabVIEW and
DAQ - DATA ACQUISITION for REAL measurements, not just simulation |
|
| In LabVIEW open 490LVDAQ.LLB file and run
490LVDAQ.vi and follow instructions For more Information check on Web: http://www.ceet.niu.edu/faculty/kostic and LabVIEW and DAQ |
|
In addition to computation and simulation, in our CEET Computer Lab (1st Floor), now, you have a set of computers equipped with Data Acquisition hardware: DAQ board, cable, and Demo-box with terminals
[Demo-box Diagram] (3 for analog input, 2 for
analog output, 1 for counter, and Ground
terminal-center pin in Function Generator area), for your own REAL
measurements of your own signal sources (± 5V, or 0-10V range). The Demo-box also incorporates, for your convenience, a
simple Function Generator, in addition to a trigger switch and digital port LEDs.
Run LabVIEW application software from Windows and Open 490LVDAQ.LLB file, specially
developed to be used in our Computer Lab with DEMO-BOX and Lab-PC+ DAQ board (may be
copied from FTP: 490LVDAQ.LLB).
| This will
transfer your computer into a color, multifunction, multi-channel oscilloscope [Click HERE!]. |