| |
|
Dr. Bose
-
A. Bose, P. He, C. Liu, B.D. Eiiman, R. J. Twieg, and S. D. Huang,
AStrong
Electron -Acceptor Methylviologen Dications Confined in a 2D Inorganic
Host: Synthesis, Structural Characterization, Charge Transport and
Electrochemical Properties of (MV)0.25V2O5"
Journal of American Chemistry Society. , 2002,124, 4-5.
- A. Bose, R. K. Gilpin, and M. Jaroniec, "Thermogravimetric and
Nitrogen Adsorption Studies of Mesoporous Silica Coated with Siloxane
Polymer" Interface Science, 2001,240, 224- 228.
-
A. Bose, R. K. Gilpin, and M. Jaroniec, "Fourier Transform Infrared
Spectroscopy Studies of the Interaction of Functionalized Siloxane
Polymers with Porous Silica" J. Colloid and Interface Science,
2000, 226, 131-135.
|
Dr. Coller
- B.D. Coller, "Intriguing nonlinear dynamics of a controller with
a sluggish actuator," Automatica, 39: 2049 - 2058, 2003.
- B.D. Coller, P.A. Chamara, "Structural nonlinearities and the
nature of the classic flutter instability," Journal of Sound and
Vibration, (posted on journal web site on November 19, 2003. To
appear in print soon).
-
P.A. Chamara and B.D. Coller, "Double flutter in
an aeroelastic system," AIAA Journal, 39, 2001
-
B.D. Coller, "Vortex model for control of
diffuser pressure recovery," Proceedings of the 2000 Conference
on Decision and Control, 2000.
-
B.D. Coller, B.R. Noack, S. Narayanan, A. Banaszuk,
A. Khibnik, "Reduced-basis model for active separation control in a
planar diffuser flow," AIAA Paper 2000-2562.
|
Dr. Fallahi
-
Fallahi, B., 2003,"Integration of Dynamic Equation of a rotating
Timoshenko Beam via Chebyshev Polynomials", International Journal
of Modelling and Simulation, vol. 23, no. 3, pp172-178.
- Weber, Timothy, Motavalli, Saeid, Fallahi, Behroozs, and Cheraghi,
S. Hossein, "A Unified Approach to Form Error Evaluation,"
Journal of International Societies for Precision Engineering and
Nanotechnology, vol. 26, no. 3, pp. 269-278, 2002.
- Fallahi B. and Seif M., "Integration of Dynamic Equation of
Spring-Mass-Damper Systems via Chebyshev Polynomials," International
Journal of Computer Mathematics, vol. 79, no. 8, pp. 923-930, 2002.
- Fallahi, B., Seif, M., and Tolocka, R.T., "An Optimization Approach
for Path and Mechanical Advantage Synthesis of Planar Mechanisms,"
Mechanika, vol. 2 no. 34, pp. 46-50, 2002.
- Bansevicius, R., Fallahi, B., Tolocka, T., and Varnavicius, V., "Smart
Underactuated Manipulator: Design and Dynamics Simulation," Mechanika,
vol 6 no. 38, ISSN 1392-1207, p. 63, 66, Kaunas: Technologija, 2002.
- Motavalli, Saeid, Zong, Helen, and Fallahi, Behrooz, "A Linear
Approximation Technique for Evaluation of Form Tolerances, Proceedings
12th International Conference on Felexible Automation and Intelligent
Manufacturing, Dresden, Germany, 2002.
- Kusculuoglu, Ziya K., Fallahi, Behrooz, and Royston, Thomas J., "New
Constitutive Model for Vibrations of a Beam with a Piezoceramic Patch
Actuator," Proceedings, SPIE, pp. 92-103.
- Bansevicius, R., Fallahi, B., Tolocka, T., and Varnavicius, V., "Variable
Structure Manipulator," Proceedings, Vibroengineering, ISSN
1392-8716, vol 4. no. 2(9), PI Vibromechanika, Vilnius, Lithuania,
p. 19-21, 2002.
- N.
Jalili, B. Fallahi,and Z.K. Kusculuoglu, 2001,"A New Approach to
Semi-Active Vibration Suppression using Adjustable Inertia Absorber",
International Journal of Modeling and Simulation,.Vol. 21(2),
pp148‑154
-
R. Arthinaryanan, B. Fallahi, and R. Bansevicius,
2001. "Design and Control of Precise Robots with Active Multi-Degree
of Freedom Kinematic Pairs", Mechanika, N1(27),pp48-53.
|
Dr. Ganesan
- Yang,
Y., Ganesan, S. and Majumdar, P., "An Investigation of the Effect of
Cutting on Temperature Rise in Machining Processes," Proceedings of
ISHMT/ASME Heat and Mass Transfer Conference, pp. 1179-1184, 2000.
|
| Dr. Gau
|
Dr. Gupta
- Zhou, Xiaoping and Gupta, Abhijit, "A Damage Identification
Method Using Vibration Modal Parameters Through Finite Element
Discretization" Proceedings of IMECE'03, Washington, D.C.,
November 15-21, 2003.
- A.
Gupta, T. Mulcahy, and J. Hull, "Electromagnetic Shock Absorbers,"
Proceedings of IMAC XXI, 2003
- Gupta, A. and Ram, Y., "Structural Modification and Dynamic
Absorption," Proceedings of IMAC XX, Los Angeles, CA, pp
1509-1511, 2002.
-
A. Gupta
and S. Thakur, "Fatigue Life of Aluminum Beams Under Random
Vibrations," Proceedings of IMAC XIX, 2001, pp. 1737-1741.
|
Dr. Kim
-
Kim, Meung J., "Transient Evaporative Laser
Cutting with a Moving Laser by a Boundary Element Method," Journal
of Applied Mathematical Modeling, 2004, accepted for publication.
-
Kim, Meung J., "Finite Element Analysis of
Evaporative Cutting with a Moving High Energy Pulse Laser," Journal
of Applied Mathematical Modeling, 2001, Vol. 25, pp.203-220.
-
Kim, Meung J., "Transient Evaporative Laser
Cutting with Boundary Element Method," Journal of Applied
Mathematical Modeling, 2000, Vol. 25, pp.25-39.
|
Dr. Kostic
- Kostic,
M., "Work,
Power, and Energy,"
Encyclopedia of Energy (C.J. Cleveland, Editor-in-Chief),
Volume 6, pp. 527-538, ISBN: 0-12-176480-X, Elsevier, 2004.
-
Kostic, M.,
Fuel-Cell and Heat-Engine Energy-Conversion Comparative Analysis,
ASEE-2004 IL-IN Section Conference, "Engineering
Engineering Education, American Society for Engineering Education,
East Peoria, March 26-27, 2004 [PPT]
-
Vaddiraju, S.R., M. Kostic, L. Reifschneider, A. Pla-Dalmau, V. Rykalin,
and A. Bross,
Extrusion Simulation and Experimental Validation to Optimize Precision
Die Design, (Word)
ANTEC 2004, The Annual Technical Conference, Society of Plastics
Engineers, Chicago, May 16-20, 2004.
-
Reifschneider, L.G., M. Kostic, and S.R. Vaddiraju,
Computational Design of a U-Profile Die and Calibrator, ANTEC
2004, The Annual Technical Conference, Society of Plastics
Engineers, Chicago, May 16-20, 2004.
Kostic,
M.,
Sampling and Aliasing: An Interactive and On-Line Virtual Experiment -
What we
see is not what it is!
,
ASEE 2003 Annual Conference,
American Society for Engineering Education, 2003.
- Kostic, M., "Leadership and Information Technologies in Education,"
ASEE-2002 IL-IN Section Conference: "Engineering Education in
Changing Economy," Illinois Institute of Technology and American
Society for Engineering Education, 2002.
|
Dr. Majumdar
-
Kasula
Bhavani and Pradip Majumdar "Three-Dimensional Finite Element
Analysis of Melting in an Alloy Irradiated with a High Energy Laser
Beam", Proceedings of the 2003 International Mechanical
Engineering Congress and R& D Expo, Paper
NO:
IMECE2003-43688, 2003.
-
Majumdar,
Pradip and Ravi Sharma, "Thermal Effects in a Laser Irradiated
Biological Tissue", Proceedings of the 6th ASME-JSME
Thermal Engineering Joint Conference, Paper No: TED - AJ03-210,
2003.
-
Majumdar,
Pradip and Prasanta Deb, "Computational Analysis of Turbulent Fluid
Flow and Heat Transfer Over an Array of Heated Modules Using Turbulence
Models", Journal of Numerical heat Transfer, Vol. 43,
No. 7, pp. 669- 692, 2003.
- Majumdar, Pradip and Deb, P., "Computational Analysis of Turbulent
Fluid Flow and Heat Transfer Over an Array of Heated Modules Using Turbulence
Models," Journal of Numerical Heat Transfer, 2002.
- Liu, Beimin and Majumdar, Pradip, "Numerical Simulation of Phase
Change Heat Transfer in PCM-Encapsulated Heat Sinks," Proceedings
of the Eighteenth Annual IEEE Semiconductor Thermal Measurement and
Management Symposium - SEMI-THERM XVIII, California, March, 2002.
- Majumdar, Pradip and Xia, Hong, "A Green's Function Model for
the Analysis of Laser Heating of Materials," Proceedings of the
5th ISHMT/ASME Heat and Mass Transfer Conference, pp. 1092-1099,
January 2002.
-
Sharma,
Ravikant and Pradip Majumdar "Finite Element Analysis of Heat
Generation and Heated Zones in Laser Irradiated Biological Tissue",
Proceedings of the 20th International Congress on
Applications of Lasers and Electro-Optics Vol. 92/93, pp. 960-969,
2001
|
Dr. Payvar
- Tatara R. and Payvar, P., "Multiple Engagement Wet Clutch Heat
Transfer Model," Journal of Numerical Heat Transfer, Part
A, 42:pp 215-231, 2002.
-
Tatara, R.,
and Payvar, P., ASpray
Boiling of R-11 on Integral Fin Tube Bundles,@
International Journal of Refrigeration, Vol 24, pp 744-754, 2001.
|
Dr. Short
- Seif, M., Short, S.R., "Determination of Residual Stress in
Thin-Walled Composite Cylinders," Experimental Techniques,
26 (2), pp. 43-46, 2002.
- Short, S.R., "Effect of Beam Overhang Length on Interlaminar
Shear Strength Composite Test Specimen," ICCE/9, Ninth Annual
International Conference on Composites Engineering, San Diego, CA,
pp. 721-723, July 1-6, 2002.
|
Dr. Song
- Ye, T. and Song, S.M., "Gait Planning for Legged Robots,"
to be presented in The Eleventh World Congress in Mechanism and Machine
Science, Tianjin China, 2004.
- Lin, J.N. and Song, S.M., "Modeling Gait Transitions between Two
Periodic Gaits for Quadrupeds and Hexapods," ASME Paper No.
IMECE2003-42710, Proc. of ASME Int. Mechanical Engineering Congress
and Exposition (IMECE), Washington D.C., November 16-21,
2003.
- Lin, J.N. and Song, S.M., "Modeling Gait Transitions of Quadruped
and Their Generalization with CMAC Neural Networks," IEEE Transactions,
Journal of System, Man and Cybernetics Part C: Applications and Reviews,
Vol. 32, No. 3, pp.177-189, August 2002.
-
Lin, B.S. and Song, S.M., "Dynamic Modeling,
Stability and Energy Efficiency of a Quadrupedal Walking Machine,"
J. of Robotic Systems, Vol. 18, No. 11, pp.657-670, 2001.
|
| Back to News |
| Last updated at
April 27th, 2004 |
| |
| |